Removing A Warning Mark From The Data Logger Display - T&D TR-5xU Series User Manual

Removing a Warning Mark from the Data Logger Display

A warning mark can be removed from the Data Logger display by one of
the following three methods:
Download Data
Once data downloading has been successfully completed, the warning mark will
disappear.
Re-start a Recording Session
The mark will disappear whenever a new recording session is started.
Remove from the [Warning Times] Display
1.
Open the [Warnig Times] Display by clicking the [Warning Times]
Button in the [Download Recorded Data] Tab Window.
2.
Click the [Clear Occurrence Times from Main Unit] button to complete
the removal.
- This will have no effect on the already recorded data; measurement and recording will
continue without interruption.
- Confirm that in the Warning Occurrence Time Column, [None] appears.
[Warning Occurrence Time] Column
[Clear Occurrence
Times from Main
Unit] Button
Basic Function - TR-51S/52S 42