Super Vhs Et; S-Vhs Et - JVC Model HR-DVS1U Instructions Manual

Super VHS ET

Your VCR is equipped with Super VHS ET that makes it possible
to record with S-VHS picture quality on VHS cassettes.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing CH5∞ or%fi, then press OK or
SELECT S-VHS ET MODE
3
Move the highlight bar
(arrow) to "S-VHS ET" by
pressing CH5∞ or%fi,
#
then press OK or
"ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
pg. 49) is in progress.
...while Video Calibration (
...when the VCR's power is off.
S-VHS ET does not work with S-VHS tapes.
(VHS deck only)
#
.
VHS MODE SET

= S-VHS ET

S-VHS MODE
VIDEO CALIBRATION
to set to
PICTURE CONTROL
DIGITAL TBC/NR
VIDEO STABILIZER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
pg. 34) is in progress.
S-VHS ET
This facility allows recording with S-VHS picture quality on
VHS cassettes. You can play back those cassettes recorded
in S-VHS ET on a VCR equipped with S-VHS ET.
NOTES:
To obtain the highest quality recording and playback
pictures over a longer period on this model, S-VHS
recording on S-VHS tape is recommended.
You can play back S-VHS ET recordings not only on this
VCR but also on another VHS VCR equipped with S-VHS
ET.
* It is recommended to specifically label S-VHS ET
recordings so you can easily distinguish them from
regular VHS recordings.
S-VHS ET recordings can also be played back on an S-
VHS VCR or a VHS VCR equipped with SQPB (S-VHS
QUASI PLAYBACK) function. However, there may be
cases where S-VHS ET playback is not possible on a
particular VCR.
Frequent still, frame-by-frame and slow-motion playback
may damage the tape and cause picture degradation.
ON
With some tapes, better picture quality may not be
ON
ON
obtained even with S-VHS ET recording. It is recom-
AUTO
mended that you do test record beforehand to make sure
ON
whether better results can be obtained.
OFF
High Grade tapes are recommended for superior results.
Make sure that "VIDEO CALIBRATION" is set to "ON" at
the Function screen (
During S-VHS ET playback, noise may appear depending
on tape quality.
Noise may appear during still, frame-by-frame and slow-
motion playback.
If the playback picture becomes blurred or interrupted,
use a cleaning cassette.
EN
pg. 34).
39