Tuner; Set Receivable Channels - JVC Model HR-DVS1U Instructions Manual

Tuner

Turn on the TV and select the AV mode.
1
4
7
1
MENU
INFORMATION
The VCR detects the band (TV or CATV) and selects the
correct band automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
CH
POWER
T W
2 3
2
5 6
8 9
0
4
DV VHS

Set Receivable Channels

TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS TUNER SET SCREEN
3
Move the highlight bar
(arrow) to "TUNER SET" by
pressing CH5∞ or %fi,
#
then press OK or
PERFORM AUTO CHANNEL
SET
4
Move the highlight bar
(arrow) to "AUTO CHAN-
NEL SET" by pressing
CH5∞ or %fi, then press
#
OK or .
Receivable channels in
your area are
automatically assigned to
the CH5∞ (+/–) buttons,
and non-receivable
channels are skipped.
NOTES:
At the end of Auto Channel Set, "SCAN COM-
PLETED" appears on screen.
If the scan was unsuccessful, "SCAN COMPLETED–
NO SIGNAL" appears on screen. Check the
connections and start again.
RETURN TO NORMAL
SCREEN
5
Press MENU.
EN
MAIN MENU
MODE SET
VHS MODE SET
.
DV MODE SET
= TUNER SET
INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND
=AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
13
CATV