Subaru LEGACY 2004 Service Manual page 21

FRONT SUSPENSION
C: DISASSEMBLY
1. FRONT BUSHING
Using the ST and a press, remove the front bush-
ing.
ST 927680000 INSTALLER & REMOVER
SET
2. REAR BUSHING
1) Scribe an aligning mark on the front arm based
on the center of rear bushing recess portion.
CAUTION:
Always put an alignment mark for aligning the
position on bushing installation.
(1) Put an alignment mark.
(2) Recess portion
Front Arm
ST
FS-00110
(1)
(2)
(1)
FS-00136
FS-20
2) Using the ST and a press, remove the rear bush-
ing.
ST1 20299AG000 REMOVER
ST2 20299AG010 BASE
(1)
(2)
(1) Press
(2) Front arm
(3) Rear bushing
D: ASSEMBLY
1. FRONT BUSHING
Assemble in the reverse order of disassembly.
CAUTION:
Install the front bushing in proper direction as
shown in the figure.
(1)
(2)
(1) Face the bushing toward the center of ball joint.
(2) Ball joint
(3) ±3°
ST1
ST2
(3)
FS-00126
(3)
FS-00102