Subaru LEGACY 2004 Service Manual page 14

1) Loosen the self-locking nut on the inner side of
rear link.
NOTE:
When loosening or tightening the adjusting bolt,
hold the bolt head and turn self-locking nut.
(1) Adjusting bolt
(2) Rear link
Rotate the left side clockwise.
Rotate the left side counterclockwise.
3) Tighten a new self-locking nut.
Tightening torque:
⋅
120 N m (12.2 kgf-m, 88.5 ft-lb)
Wheel Alignment
(1)
(2)
FS-00103
To increase toe-in.
FS-00018
To decrease toe-in.
FS-00019
2) Turn the adjusting bolt until toe-in is at the spec-
ification.
NOTE:
When the left and right wheels are adjusted for toe-
in at the same time, the movement of one scale
graduation changes toe-in by approx. 0.6 mm (0.02
in).
Rotate the right side counterclockwise.
Rotate the right side clockwise.
FS-13
FRONT SUSPENSION
FS-00019
FS-00018