Operation For Burning Coal Fuel - New Buck Corporation COMBO COAL & WOOD STOVE Owner's Manual

OPERATION FOR BURNING COAL FUEL

CAUTION:
The Combo Coal & Wood Stove Comes with WOOD AIR SLIDE ADJUSTER PLATE in-
stalled. You must change the WOOD AIR SLIDE ADJUSTER PLATE inside of the front
cast ash door to use the Combo Coal & Wood Stove unit for burning coal.
CHANGING WOOD AIR SLIDE ADJUSTER PLATE TO
1. Find the coal air slide adjuster plate package inside the fire box and remove. Open contents.
(SEE BELOW)
2. Open the front cast ash door and remove the wood air slider adjuster plate from inside of door,
by unscrewing the air slide adjuster knob. (SEE BELOW). Note there is NO NOTCH in the coal air
slide adjuster plate. Place the coal air slide adjuster plate in place of the wood slide adjuster plate
and replace air slide adjuster knob. You are now ready to safely use the Combo Coal & Wood
Stove to burn coal.
For safe and proper operation according to
the United States Government Protection Agency
regulations for coal stoves, you must use the
proper air slide adjuster plate with the proper
fuel you intend to burn.
COAL AIR SLIDE ADJUSTER PLATE
COAL AIR SLIDE ADJUSTER PLATE
AIR SLIDE ADJUSTER PLATE KNOB
COAL AIR SLIDE ADJUSTER PLATE
AIR SLIDE ADJUSTER PLATE KNOB
OPEN
CLOSED
Page 26
SIDE VIEW OF CAST
ASH DOOR AND
INSTALLED
COAL AIR SLIDE
ADJUSTER PLATE