Laser Operation - Metrologic IS4320 ScanGlove Programming Manual

Enter/Exit Program Mode

Laser Operation

This option is the default setting. When the laser
**Normal Scan
activates by the IR sensor, the laser beam will emit
from the output window. It will also display a
constant, horizontal line until it senses a bar code
R S 5
or until the scanner timeout elapses.
Pulsing Scan
When the laser activates by the IR sensor, the laser
beam will emit from the output window. It will also
display a pulsing, horizontal line until it senses a
R S 6
bar code or until the scanner timeout elapses.
Custom Scan This option is available for special applications.
Do not scan the CUSTOM SCAN bar code unless
instructed by a Metrologic representative.
L P 8
4
* *