Chapter 3 - Basic Configuration Instructions
2
Press the "+" button in the "Scheduled tasks" section of the main window.
In the opened "New task" window choose "Up interface" in the "Command"
3
field. Then type the wanted IP-address and network mask in the corresponding
fields of the window and press the "OK" button.
Restart the device.
4
After the device restarts, the "ERConsole" utility will add the wanted IP-address
into its Ethernet interface configuration.
Alvarion BreezeNET B130/B300 GigE
Figure 3-4: ERConsole (Step 4)
44
Lost Password Recovery
Technical User Manual