Table of Contents
Advertisement
Chapter 2 - Hardware Description
Installation Preparations
Table 2-3: RJ-45 Connector Soldering Procedure
Illustration
Description
Step 3. Put connector parts on the
STP service cable as shown.
Attach RJ-45 connector without
grounding to the STP service cable
according to the "RJ-45" soldering
scheme (in the "Supplementary
information" chapter of this manual)
and crimp the connector using a
crimp tool.
Please tightly crimp the
RJ-45 connector. Not
crimped or badly crimped
connector damages the
unit when assembled into
it which is not considered
as a warranty case.
Step 4. Put Part 4 on the attached in
the previous step RJ-45 connector.
Step 5. Screw Part 2 on Part 4. This
fixes the "RJ-45" connector on the
cable. Check that the connector is
properly fixed on the cable.
Alvarion BreezeNET B130/B300 GigE
19
Technical User Manual
Hide quick links:
Advertisement
Table of Contents
