Figure 3-2: Erconsole (Step 2) - Alvarion BreezeNET B130 GigE Technical User's Manual

Chapter 3 - Basic Configuration Instructions
3 Restart the device. During its restart, the ERConsole utility will determine the
device and will show necessary information about it in the "Discovered
devices" section of the main window.
Send "Serial" and "Sequence" fields values to the Technical Support.
4
5 You will be given a factory password for the device.
Click the "+" button in the "Scheduled tasks" section of the main window.
6
In the opened "New task" window choose "Reset configuration" in the
7
"Command" field. Then enter Serial number and factory password in the
corresponding fields. Click "Ok".
Alvarion BreezeNET B130/B300 GigE

Figure 3-2: ERConsole (Step 2)

42
Lost Password Recovery
Technical User Manual