Table of Contents
Advertisement
Chapter 5 - Configuration Via Web Interface
"Test time" parameter allows setting the duration of the test for each bitrate in
seconds (5 seconds by default).
The bitrates list on the "Performance test" page consists of the bitrates that
corresponds to the channel bandwidth set on the unit (5/10/20/40MHz). To
perform the tests for the bitrates related to the other channel bandwidth you need
to reconfigure channel bandwidth ("Channel Width" parameter in the "Radio
Setting" section of the "Basic Settings" page) on both units that form the tested
link.
Bi-directional performance test output description for 180 Mbps bitrate (40MHz
channel bandwidth):
Alvarion BreezeNET B130/B300 GigE
Figure 5-16: Performance Test Sample
87
Device Status
Technical User Manual
Hide quick links:
Advertisement
Table of Contents
