Set The Operator Language - Oce VarioPrint 2090 Configuration And Maintenance Manual

Set the operator language

Introduction
Task for: key operator
You can select the language of the Settings Editor and the text on the operator
panel of the Océ VarioPrint 2090. The default language is UK-English.
Use the Océ Settings Editor to select a language. You can select one of the 14
available languages.
There is no language setting available on the screen of the operator
Note:
panel. You can only change the language through the Océ Settings Editor.
When to do
If the language on the screen is not the preferred language in your company,
■
you change this language.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the key
operator mode (see 'Access the Océ VarioPrint 2090 Settings Editor in key
operator mode' on page 9).
System configuration 43