Adjust The Océ Varioprint 2090; Activate And Change The Wake-Up Pin Code - Oce VarioPrint 2090 Configuration And Maintenance Manual

Adjust the Océ VarioPrint 2090

Activate and change the wake-up PIN code

Introduction
When the system is in safety sleep mode, the operator panel is off. The system
goes to the safety sleep mode in the following situations.
When you press the power switch
■
When the power returns after a mains failure.
■
If you activate the wake-up PIN code, to get the system out of safety sleep
mode. If you do not select 'Activate wake-up PIN code', the system asks for a
PIN code before the system can wake up.
When you activate the wake-up PIN code, you can change this PIN code
(Minimum 1 digit, maximum 5 digits).
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the key
operator mode (see 'Access the Océ VarioPrint 2090 Settings Editor in key
operator mode' on page 9).
System configuration
.
29