Set Another Language For The Océ Express Webtools - Oce ColorWave 600 User Manual

Set another language for the Océ Express WebTools
Set another language for the Océ Express WebTools
Introduction
The language setting of the internet browser you use defines the language in which
the user interface of the Océ Express WebTools is displayed.
Note: This language setting does not influence the language on the printer operator
panel.
Purpose
Change the language setting of the user interface of the Océ Express WebTools.
Note: If the selected language cannot be supported, the standard user interface
language for the Océ Express WebTools will be US English.
How to change the language setting in Microsoft
Open Microsoft
1.
Select Tools menu - Internet options. The internet options window appears.
2.
Make sure the General tab is selected.
3.
Click the Languages button in the lower part of the window. Another window opens.
4.
Select the language of your choice. A new language can be added to the list with the
5.
Add button.
Move the newly added language up in the list to the top position.
6.
Click OK to confirm or Cancel to close both windows again.
7.
Click Refresh in the toolbar or open another page. The language of the application
8.
will be changed.
Note: It is possible that the internet options are put under a different menu,
depending on the Microsoft
How to change the language setting in Mozilla Firefox
Open Mozilla Firefox
1.
Select the Extra menu - Options. The Options window appears.
2.
Click the Advanced button and make sure you have selected the General tab.
3.
In the Languages section click the Choose... button. Another window opens.
4.
Select the language of your choice. A new language can be added to the list with the
5.
Add button.
Move the newly added language up in the list to the top position.
6.
86 Chapter 4 Configure the printing system
®
Internet Explorer.
®
Internet Explorer version you use.
™
.
®
Internet Explorer
™