Access The Océ Varioprint 2090 Settings Editor In System Administrator Mode - Oce VarioPrint 2090 Configuration And Maintenance Manual

Access the Océ VarioPrint 2090 Settings Editor in system
administrator mode
Introduction
The Océ VarioPrint 2090 Settings Editor is an application that is available to
you
if you are responsible for the network configuration.
■
if you provide maintenance to the Océ VarioPrint 2090.
■
To access the system administrator mode of the Océ VarioPrint 2090 Settings
Editor, you need the special system administrator PIN code.
The Océ VarioPrint 2090 Settings Editor is a web based application on the
controller that you can access through a standard web browser. The supported
web browsers are for example MS Internet Explorer 4.0, 5.0, 5.5 and 6.0 in
combination with Windows 9x, NT4 or Windows 2000.
When to do
You can use the options of the Océ VarioPrint 2090 Settings Editor to change
some of the default printer settings.
If the initial network configuration is not correct, no person can connect
Note:
to the controller to change the settings or to print.
More than one session of the Océ VarioPrint 2090 Settings Editor can be
Note:
active at the same time.
12 Océ VarioPrint 2090 Configuration and maintenance manual