Display the software version
Introduction
Task for: key operator
The Océ VarioPrint 2090 Settings Editor enables you to read the versions of
the installed software on the Océ VarioPrint 2090.
You can display the software version of the following.
The main software of the scanner.
■
The Image Processing software of the scanner.
■
The version of the complete system.
■
The software of the Océ Smart Imager.
■
The operating system software of the Océ Smart Imager.
■
The main software of the printer.
■
The Image Processing software of the printer.
■
These settings are read-only.
You find the procedures to display the software versions in this chapter.
When to do
If you call the service department, a service technician can ask you for these
■
software version numbers.
Before you begin
Start the Océ VarioPrint 2090 Settings Editor in your web browser in the key
operator mode (see 'Access the Océ VarioPrint 2090 Settings Editor in key
operator mode' on page 9).
100
Océ VarioPrint 2090 Configuration and maintenance manual