Using The Utility Menu - Agilent Technologies 34405A User's And Service Manual

Using the Utility Menu

Secondary
Primary Display Display Settings Description
tESt no
ºunit ºC
bEEP On
P-On rESEt
2.diSP On
StorE On
Edit On
Error nonE
CodE 1-dd.d
UtitY donE
34405A User's and Service Guide
The Utility Menu allows you to customize a number of
non- volatile instrument configurations. It also displays error
messages and hardware revision codes. The contents of the
Utility Menu are shown in the table below.
YES IF YES, immediately execute self-test
upon next Store/Recall button push.
After self-test completes, returns to
normal instrument operation.
ºF Changes displayed units for
temperature measurements
OFF Enable, disable Diode, Min/Max, Limit
Test, and Hold beep operations
LASt Enable or disable power-on recall of
State 0 (last power-off instrument
state). Note: The multimeter always
saves the power-down state. This just
determines whether or not to recall the
state at power-on.
OFF Turn the secondary display on or off.
OFF Enable, disable all front panel state
store operation
OFF Enable, disable all math register editing None
nn.Err See Reading Error Messages below.
2-dd.d Displays processor code revision
numbers.
1= Measurement processor revision.
2= IO processor revision.
Display donE on primary display for 1
second then return to normal operation
Features and Functions
Remote Command
*TST? (self-test is executed
immediately)
UNIT:TEMPerature <units>
SYSTem:BEEPer:STATe <mode>
MEMory:STATe:RECall:AUTO <mode>
DISPlay:WINDow2[:STATe] <mode>
MEMory:STATe:STORe <mode>
SYSTem:ERRor?
*IDN? (from remote also returns
manufacturer's name, model number,
and the serial number)
None
2
41