Using Preset Tuning - JVC MX-KC58 Instructions Manual

To tune in to channels
1
Select "ALL SRCH."
The ALL indicator lights up.
ALL SRCH
CAT SRCH
2
Select the channel.
Remote control:
Category Search
You can select the channel category and tune in to only the
channels included in the selected category.
1
Select "CAT SRCH."
ALL SRCH
CAT SRCH
2
Select the channel category.
The channel with the smallest channel number in the
category is displayed.
3
Select the channel.
Remote control:
The selected channel is tuned in after a few seconds.
19
ALL indicator
Main unit:
Main unit:
Direct Channel Access
You can tune in to the desired channel directly by entering
the channel number.
1
Press DIRECT.
2
Press the numeric keys to enter the desired channel
number while the channel number position is
flashing.
• To use the numeric keys, see "How to Select Numbers"
on page 9.

Using preset tuning

You can preset up to 30 channels.
To store the preset channels
1
Tune in to the channel you want to preset.
2
Activate the preset number entry mode.
• Finish the following process while the indication on the
display is flashing.
3
Select a preset number for the channel you store. See
"How to Select Numbers" on page 9.
• You can also use 4/¢ on the main unit.
4
Store the channel.
5
Repeat steps 1 to 4 until you store all the desired
channels.
Remote
ONLY