Chapter 17 Configuring Snmp - Cisco Aironet 1100 Series Installation And Configuration Manual

Configuring SNMP
This chapter describes how to configure the Simple Network Management Protocol (SNMP) on your
access point.
For complete syntax and usage information for the commands used in this chapter, refer to the Cisco
Note
Aironet 1100 Series Access Point Command Reference for this release and to the Cisco IOS
Configuration Fundamentals Command Reference for Release 12.2.
This chapter consists of these sections:
Understanding SNMP, page 17-2
•
• Configuring SNMP, page 17-4
Displaying SNMP Status, page 17-10
•
OL-2851-01
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
C H A P T E R
17
17-1