Reloading The Image Using The Web Browser Interface; Browser Http Interface - Cisco Aironet 1100 Series Installation And Configuration Manual

Working with Software Images
Command
Step 5 end
Step 6
archive upload-sw
rcp:[[[//[username@]location]/directory]/image-na
me.tar]
The archive upload-sw privileged EXEC command builds an image file on the server by uploading these
files in order: info, the IOS image, the HTML files, and info.ver. After these files are uploaded, the
upload algorithm creates the tar file format.

Reloading the Image Using the Web Browser Interface

You can also use the Web browser interface to reload the access point image file. The Web broswer
interface supports loading the image file using HTTP or TFTP interfaces.
Note

Browser HTTP Interface

The HTTP interface allows you to browse to the access point image file on your PC and download the
image to the access point. Follow the instructions below to use the HTTP interface:
Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape
Step 1
Navigator (version 4.x).
Enter the access point's IP address in the browser address line and press Enter. An Enter Network
Step 2
Password screen appears.
Enter your username in the User Name field.
Step 3
Enter the access point password in the Password field and press Enter. The Summary Status page
Step 4
appears.
Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears.
Step 5
Click the Browse button to locate the image file on your PC.
Step 6
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
19-32
Your access point configuration is not changed when using the browser to reload the image file.
Chapter 19
Purpose
Return to privileged EXEC mode.
Upload the currently running access point image to the RCP
server.
For //username, specify the username; for the RCP copy
•
request to execute, an account must be defined on the
network server for the remote username. For more
information, see the "Preparing to Download or Upload
an Image File by Using RCP" section on page
For @location, specify the IP address of the RCP server.
•
For /directory]/image-name.tar, specify the directory
•
(optional) and the name of the software image to be
uploaded. Directory and image names are case
sensitive.
The image-name.tar is the name of software image to be
•
stored on the server.
Managing Firmware and Configurations
19-27.
OL-2851-01