Using The Security Hasp Adapter - Cisco Aironet 1100 Series Installation And Configuration Manual

Using the Security Hasp Adapter

Using the Security Hasp Adapter

The security hasp on the wall or ceiling mounting bracket and the security hasp adapter locks the access
point to the bracket to make it more secure. After you have installed the access point on the detachable
mounting bracket, follow these steps to secure it with a padlock (Master Lock model 120T, 121T or
equivalent).
Connect the Ethernet cable and power jack.
Step 1
Insert the T-shaped tab on the security hasp adapter into the Kensington lock slot on the access point.
Step 2
See
Figure D-4
Rotate the adapter to engage it with the security hasp. The hole in the adapter should be aligned with the
Step 3
hole in the security hasp.
Secure the adapter to the security hasp with a padlock. Your installation will look similar to
Step 4
Figure D-5
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
D-6
Figure D-4.
Security Hasp Adapter
Security Hasp with Padlock
Appendix D Mounting Instructions
Figure
OL-2851-01
D-5.