Table of Contents
Advertisement
Setting Quality of Service (QoS) Levels
VCON's PacketAssist™ Architecture simplifies Video over IP bandwidth
management and delivers true Quality of Service (QoS) for IP networks.
PacketAssist automatically adapts video meeting transmissions to current network
conditions, while ensuring optimal video and audio performance.
The QoS Properties dialog box contains properties for controlling the type of
Quality of Service that will be used for transmitting packets from the 5760 VC. A
password is required to open this dialog box, and we recommend that only system
administrators with knowledge of QoS make any changes, if required.
CAUTION The Quality of Service defaults should be changed only by a
É
To set Quality of Service options
1.
When the H.323 tab of the Network dialog box is open, press the green
QoS SoftKey.
Press the green QoS SoftKey to view and
change Quality of Service properties.
2.
Enter the administrator password, 1234.
3.
Set QoS properties as follows (see tables on page 4-11):
Priority Type
Mitel Networks 5760 VC User's Guide
system administrator.
Select the type of QoS priority used for transmitting
packets during heavy network congestion conditions.
No Priority - network transfers packets in a normal
Best-Effort method (First In, First Out, or FIFO).
IP Precedence - network gives priority to video,
audio, control bits according to the eight levels of IP
precedence.
Diffserv - network transfers packets according to
specific differentiated services priority levels.
Chapter 4 Network Configuration
4-9
Advertisement
Table of Contents
