Mitel 5760 VC User Manual page 4

Safety Notice
When you use the 5760 VC system, observe the following safety guidelines:
Make sure that the voltage of the power supply matches the AC power available at
your location:
q
115V/60Hz in most of North and South America and some Far Eastern
countries such as Japan, South Korea and Taiwan.
q
230V/50Hz in most of Europe, the Middle East and the Far East.
Make sure the monitor and attached accessories are electrically rated to operate
with the AC power available in your location.
Plug the accessories' power cables into properly grounded power sources. These
cables are equipped with three-prong plugs to help ensure proper grounding.
Do not use adapter plugs or remove the grounding prong from a cable. If you must
use an extension cable, use a three-wire cable with properly grounded plugs.
Make sure that nothing rests on the cables and that the cables are not located where
they can be stepped on or tripped over.
Do not spill food or liquids on the system or accessories.
Keep the system away from radiators and heat sources, and do not block cooling
vents.
iv Mitel Networks 5760 VC User's Guide