Applying The New Upgrade - Mitel 5760 VC User Manual

Appendix C Software Upgrade
C.2

Applying the New Upgrade

5760 VC User Instructions and Screens
1. When the progress bar shows that
Step 4 of 4 is complete, wait for the
remote PC user to inform you that
the upgrade is complete, and then
restart 5760 VC.
2. When the system restarts, a message
appears.
Press <OK> to accept the
upgrade.
Mitel Networks 5760 VC now
transfers your old configuration
parameters and Phone Book to
the new version and starts the
Post-Upgrade procedures.
CAUTION If you do not press <OK> now on the Mitel Networks 5760 VC
C-4
unit, the system will restart in Installer Mode (see "Installer
Mode" on page C-5).
Remote PC User Instructions
1. When the process is complete, a
message appears, saying that the
upgrade is complete.
Click OK. Restart the Mitel
Networks 5760 VC unit, or tell
the Mitel Networks 5760 VC
user to restart it.
2. Wait for confirmation from the Mitel
Networks 5760 VC user that
upgrade was successful; that Mitel
Networks 5760 VC passed through
the Post-Upgrade procedures
without problems and that the Guide
Screen opened.
Mitel Networks 5760 VC User's Guide