U640 Setting Communication Time - Kyocera ECOSYS M6026cidn Service Manual

Item No.
U640 Setting communication time 1
Description
Sets the detection time when one-shot detection is selected for remote switching. (This setting
item will be displayed, but the setting made is ineffective.)
Sets the detection time when continuous detection is selected for remote switching. (This setting
item will be displayed, but the setting made is ineffective.)
Method
1. Press the start key.
2. Select the item to be set.
Display
Time (One)
Time (Cont)
Setting the one-shot detection time for remote switching
1. Change the setting using the cursor left/right keys.
Description
One-shot detection time for remote switching
2. Press the start key. The value is set.
Setting the continuous detection time for remote switching
1. Change the setting using the cursor left/right keys.
Description
Continuous detection time for remote switching
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Sets the one-shot detection time for remote switching.
Sets the continuous detection time for remote switching.
1-3-61
Setting range Initial setting
0 to 255 7
Setting range Initial setting
0 to 255 80
2PX/2PY