Declaration Of Conformity - DURKOPP ADLER 906 Operating Instructions Manual

Performance description
Thread handling
• Electronic upper thread monitor
• Programmable upper thread tension:
• Threading device:
• Programmable stitch counter for hook thread monitoring and item
• Optional:
Ergonomics
• Adjustable feet to even out the level of the floor and secure stance of
• Working height of the front edge of the table top for operation of the unit
• Table top tilted by 15° towards the operator
• Foot pedal freely movable within the available cable length

2.2 Declaration of conformity

The machine complies with the European regulations specified in the
declaration of conformity or in the installation declaration.
Operating instructions 906 - Version 00.0 - 05/2014
Tension values for different thread extraction directions stored in seam
program. This creates a clean seam.
Pulls the needle thread under the sewing material on the 1st stitch.
counter
• Electronic residual thread monitor
• Stitch position optimization kit: For seam optimization in the removal
direction of 0 - 90°
the unit
while standing: 880 × 910 mm
11