Table of Contents
Advertisement
16
3.2
Declaration of Conformity
The machine complies with European regulations ensuring health,
safety, and environmental protection as specified in the declara-
tion of conformity or in the declaration of incorporation.
3.3
Proper use
The 650-10 is intended for sewing light to moderately heavy
material. Light to moderately heavy material requires a needle
strength of 70-100 Nm.
The machine is intended only for use with dry sewing material.
The sewing material must not contain any hard objects.
The seam must be completed with a thread that satisfies the
requirements of the specific application at hand.
The machine is intended for industrial use.
The machine may only be set up and operated in dry conditions on
well-maintained premises. If the machine is operated on premises
that are not dry and well-maintained, then further measures may
be required which must be compatible with DIN EN 60204-31.
Only authorized persons may work on the machine.
Dürkopp Adler cannot be held liable for damages resulting from
improper use.
WARNING
Risk of injury from live, moving, cutting and
sharp parts!
Improper use can result in electric shock,
crushing, cutting and punctures.
Observe all instructions provided.
Operating Instructions 650-10 - 03.0 - 08/2016
Machine description
Hide quick links:
Advertisement
Table of Contents
