Panasonic SA-VK960GC Service Manual page 71

Step 6 Remove 3 screws at the rear panel. (For GCS/GCT/GS)
Step 6 Remove 1 screw at the rear panel. (For GC only)
Step 7 Release the tab at each side of the rear panel in the
direction of arrow.
Step 8 Release the tab at each side of the front panel in the
direction of arrow.
Step 9 Release the 2 hooks at the bottom part of the front
panel.
Step 10 Remove the bottom chassis.
SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
Step 11 Flip the unit (including the front panel, rear panel, D-
Amp P.C.B., SMPS P.C.B. & Speaker P.C.B.) vertically and
position it according to the diagram shown.
Step 12 Connect Main P.C.B at the connectors (CN2810 &
CN5603) on D-Amp P.C.B and (CN5902) on SMPS P.C.B.
Step 13 Connect cables at the connectors (CN2602,
CNP2101, CNP2601, CNP2913, CNP2914 & W1A) on Main
P.C.B.
71