Panasonic SA-VK960GC Service Manual page 34

SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
9.3.2. Service Mode Table 2
Mode Name
Firmware Version To check the EEPROM checksum and
Check Micro-P firmware version.
Cold Start For restart.
Tape Ejected Test To check on the eject function.
(For DECK 1/2)
FL Display Test To check the FL segments display.
(All segments will light up and LED will
blink at 0.5 second interval).
Item
Description
FL Display
(Condition 1)
Micro-processor
Version
If the version of the EEPROM does not match,
[NG] is displayed.
(Condition 2)
Micro-processor
Version
(a) If there is NO EEPROM header string
OR
(b) If there is no EEPROM (no data is received
by Micro-processor), [NO] is displayed.
(Condition 3)
Micro-processor EEPROM Checksum
Version (If applicable)
The checksum of EEPROM and firmware
version will be displayed. (If applicable)
* ROM correction
** Firmware version No.
No display.
Both deck will be ejected automatically.
All segments of FL Will light up
34
Key Operation
Front Key
In Doctor Mode, press [STOP] button
on the main unit, followed by [4] and
[7] on the remote control unit.
To exit, press [ENTER] button on the
remote control unit or power off the
main unit.
In Doctor Mode, press [4] on the
remote control unit.
To exit, press [ENTER] button on the
remote control unit or power off the
main unit.
In Doctor Mode, press [0] button on
the remote control.
To exit, press [ENTER] button on the
remote control unit or power off the
main unit.
In Doctor Mode, press [ PLAY/REC]
button on the remote control unit.
To exit, press [ENTER] button on the
remote control unit or power off the
main unit.