Service Mode Table (For Inspection) - Panasonic SA-VK960GC Service Manual

9.3.

Service Mode Table (For Inspection)

9.3.1. Service Mode Table 1
Item
Mode Name
Self-Diagnostic To enter into self-diagnostic checking
Mode for main unit.
DVD/CD Changer To determine the reliability of DVD/CD
Reliability Test Changer Mechanism Unit. (For more
information, refer to Section 9.3.4.
"DVD/CD Changer Unit Ageing Test
Mode")
SRVC_TRV To unlock the traverse unit for service.
Doctor Mode To enter into Doctor Mode for
checking of items.
FL Display sequence:
Display 1 -> 2 -> 3 -> 4
Description
1. All trays are set to "STOCK" position.
2. Mechanism set to tray 5.
3. Cam rear set to "HOME" position.
(Display 1)
All segments of FL will light up.
(Display 2)
(Display 3)
(Display 4)
SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
FL Display
The counter will
increment by one.
When reach 99999
will change to 00000
33
Key Operation
Front Key
In DVD/CD or tape mode (ensure no
disc or cassette is inserted into DECK
1/2):
Press and hold [STOP] button for two
seconds, followed by [ /FF/ ]
button on the main unit.
/l
To exit, press [ , AC IN] button on
main unit or remote control unit.
In DVD/CD mode (ensure no disc is
inserted):
In self-diagnostic mode, press [1]
button on remote control.
To exit, press [ /l , AC IN] button on
the main unit or remote control unit.
(The tray will return to PLAY position
and then power off.)
Select DVD/CD mode (ensure no
disc is inserted):
In self-diagnostic mode, press
[SINGLE CHANGE] button on main
unit.
To exit, power off the main unit
In DVD/CD mode, press [STOP]
button on the main unit, followed by
[4] and [7] button on the remote
control unit.
To exit, press [ENTER] button on the
remote control unit or power off the
main unit.