10.25.1. Disassembly of Traverse Deck
(DT69U3)
Step 1 Release the catch in the direction of arrows (1) and
press the pin in the direction of arrow (2).
Step 2 Remove the 4 fixed pins.
Note: Keep the fixed pins in safe location for assembling.
Step 3 Remove the floating rubbers.
Caution Note: As floating rubbers (4 pieces) come off at
the same time, be careful not to lose them.
SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
Step 4 Remove the traverse deck (DT69U3) from the middle
chassis.
Step 5 Insert a short pin into the FFC.
10.26. Disassembly of Deck
Mechanism
• • • • Follow (Step 1) to (Step 5) of Item 10.3.
• • • • Follow (Step 1) to (Step 6) of Item 10.10.
• • • • Follow (Step 1) to (Step 6) of Item 10.16.
10.26.1. Disassembly of Pinch Roller F
Assembly & Head Block Unit
* The mechanism as shown below is for DECK1. For DECK
2, perform the same procedures.
Step 1 Release the catch, and then remove the pinch roller (F).
Step 2 Release 2 claws in the direction of arrow (1) and detach
the head block unit connector in the direction of arrow (2).
63