Table of Contents
Advertisement
7 Operation Procedures
7.1.
Main Unit Key Buttons Operations
Refer to the numbers in parentheses for page reference. Buttons such as
remote control.
AC supply indicator [AC IN]
This indicator lights when the unit is
connected to the AC mains supply.
Standby/on switch [ /l]
Press to switch the unit from on
to standby mode or vice versa.
In standby mode, the unit is still
consuming a small amount of
[SURROUND ENHANCER]
[SUPER SURROUND]
[SUPER SOUND EQ]
[SOUND EQ]
[SUBWOOFER]
MUSIC PORT jack
Headphone jack
Avoid listening for prolonged
periods of time to prevent hearing
Plug type
3.5 mm stereo
(not included)
Deck 1 [ , OPEN]
[BAND, TUNER]
[DISPLAY
[DECK 1/2]
[ , RECORD]
Deck 1 cassette holder
power.
USB port
[ , USB]
Display
damage.
[EXT-IN]
DEMO]
To select the desired display mode
Every time you press the button:
Normal
Peak hold
Refl ection
Off
Normal
Indicates strength of the sound in each tonal range.
Peak hold
Peak sound value of each sound range (on display for about one second after it occurs).
Refl ection
Indicates the strength of the sound in each tonal range (displayed in the opposite direction of normal
mode).
SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
function the same as the controls on the
15
Remote control signal
sensor
Disc trays
[ , OPEN/CLOSE]
[ , MULTI CHANGE]
[ , SINGLE CHANGE]
[1
] to [5
]
(disc direct play)
MIC VOL ]
[ , DVD/CD]
Microphone(MIC 1, MIC 2)
jacks
[ , STOP]
Deck 2 [OPEN,
]
Disc skip/search, tape
fast-forward/rewind,
tuning, time adjustment
[
,
/ REW],
[
,
/ FF]
[
, TAPE]
VOLUME
Deck 2 cassette holder
Advertisement
Table of Contents
