10.26.3. Installation of Belt
Step 1 The boss and marking should be positioned
horizontally.
Step 2 Put the winding belt on the pulley temporarily.
Step 3 Install the flywheel F assembly.
Step 4 Put the winding belt on the flywheel F.
SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
Step 5 Install the winding lever and thrust spring while pressing
the winding arm assembly in the direction of arrow.
Step 6 Install the flywheel R assembly.
Step 7 Put the capstan belt A temporarily as shown below.
65