Panasonic SA-VK960GC Service Manual page 41

9.4.5. USB Error Code Table
Error
Diagnosis Contents
Code
F650 USB device: Devices Devices other than the mass storage
other than mass
storage
F651 USB device: Non-
Full Speed Device
F652 USB device:
Interface NG
F655 USB device:
Overcurrent
detection
Description of error
class are connected.
The device that the transfer rate did not
correspond to Full Speed was
connected.
The device in the interface (subclass)
outside correspondence was
connected. (correspondence interface)
001b: Reduced Block Commands
(RBC)
010b: SFF-8020i. MMC-2 (ATAPI)
110b: SCSI transparent command set.
The overcurrent of 500mA or more was
detected in VDD USB, and the USB
device driver function was intercepted.
(To intercept the current.)
SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
Automatic FL Display
41
Remarks
Press [ STOP] on
main unit for next error.
Press [ STOP] on
main unit for next error.
Press [ STOP] on
main unit for next error.
Press [ STOP] on
main unit for next error.