Service Mode Table - Panasonic SA-VK960GC Service Manual

9.2.2.

Service Mode Table 2

Item
Mode Name
DVD laser
DVD laser drive current measurement.
drive current
DVD laser drive current is measured
measurement and the result is displayed together
with the initial value stored in the
EEPROM IC.
After the measurement, DVD laser
emission is kept on. It is turned off
when POWER key is switched off.
FL Display sequence:
Display 1
ADSC internal
ADSC internal RAM data check.
RAM data ADSC internal RAM data is read out
check
and displayed.
CD laser drive CD laser drive current measurement.
current
CD laser drive current is measured
measurement and the result is displayed together
with the initial value stored in the
EEPROM IC.
After the measurement, CD laser
emission is kept on. It is turned off
when POWER key is switched off.
FL Display sequence:
Display 1
Description
The value denotes the current in decimal
notation.
2.
The value is shown in hexadecimal
notation. The above example shows the
data in ADSC address FBOh is XXXXh.
The value denotes the current in decimal
notation.
2.
The above example shows the initial current
is XXXmA and the measured value is
YYYmA.
FL Display
(Display 1)
DVD laser current
measurement mode
(Display 2)
DVD Identify as
DVD
Laser LDD mode
Laser
Value
Initial Value
The above example shows the initial
current is XXXmA and the measured
value is YYYmA.
Address
(Display 1)
CD Laser Current
Measurement Mode
(Display 2)
CD
Laser Initial
Value
27
SA-VK960GC / SA-VK960GCS / SA-VK960GCT / SA-VK960GS
Key Operation
Front Key
In STOP (no disc) mode,
press [STOP] button on the
main unit, and
[FUNCTIONS] button on
the remote control unit.
Cancelled automatically
5 seconds later.
Press [FL Display] on
remote control unit for next
page (FL Display) on values
of dvd drive current.
In STOP (no disc) mode,
press [STOP] button on the
main unit, and [1] or [2]
button on the remote control
unit.
RAM Data
To exit, press [STOP]
for Specified
button.
Address
In STOP (no disc) mode,
press [STOP] button on
the main unit, and [3]
button on the remote
control unit.
Cancelled automatically
5 seconds later.
Press [FL Display] on
remote control unit for next
page. (FL Display)
CD Laser
Value