Pro-Form Space Saver 895 ZLE User Manual page 7

3. Attach the Rear Stabilizer (7) to the Folding
Frame (2) with two M10 x 127mm Button
Screws (83).
Hold the handle on the Folding Frame (2) and
press the Latch Button (68). Then, lower the
Folding Frame until the Rear Stabilizer (7) rests
on the floor.
4. Hold a Hub Cover (75) and a Crank Arm (36)
against the left Crank Hub (38).
Align the holes in the Hub Cover (75) and the
Crank Arm (36) with the unused holes in the left
Crank Hub (38).
Insert four Hub Screws (87) into the Hub Cover
(75) and the Crank Arm (36). Then, finger
tighten the Hub Screws into the left Crank Hub
(38). Tip: Tighten one Hub Screw, and then
tighten the Hub Screw across from the first
Hub Screw. Then, tighten the remaining two
Hub Screws.
Repeat this step on the right side of the elliptical
exerciser; make sure that the Crank Arms
(36) are oriented so the Crank Bushing
Sleeves (43) are in the positions shown.
Note: There are no Pulley Screws (98) on the
right side.
3
Handle
4
38
36
75
87
87
43
7
83
7
2
68
43
98
36