Pro-Form Space Saver 895 ZLE User Manual page 10

9. Identify the Left Upper Body Arm (8) and the
Left Upper Body Leg (11), which are marked
with "Left" stickers, and orient them as shown.
Insert the Left Upper Body Arm (8) into the Left
Upper Body Leg (11).
Attach the Left Upper Body Arm (8) with two M8
x 41mm Button Bolts (78) and two M8 Jam Nuts
(79). Make sure that the Jam Nuts are in the
hexagonal holes in the Left Upper Body Leg
(11).
Attach the Right Upper Body Arm (9) to the
Right Upper Body Leg (12) in the same way.
10. Apply a generous amount of the included
grease to the Pivot Axle (74). Insert the Pivot
Axle into the Upright (3) and center it.
Orient the Left Upper Body Leg (11) as shown,
and slide it onto the left end of the Pivot Axle
(74).
Then, slide the Right Upper Body Leg (12) onto
the right end of the Pivot Axle (74).
Tighten an M8 x 23mm Button Screw (84), an
M8 Washer (88), and a Wave Washer (111) into
each end of the Pivot Axle (74). Make sure that
the Wave Washers are on the ends of the
Pivot Axle.
9
Hexagonal
8
Holes
79
Hexagonal
Holes
11
10
Grease
74
88
11
111
84
10
9
79
78
12
78
88
3
111
12
84