Getting Started; Computer Instructions - HELIX H901 Assembly Manual

4/ GETTING STARTED - COMPUTER
TOTAL RESET KEY
Press to total reset and come back initial
setting mode. ( set CLOCK /
CALENDAR / TIME)
RECOVERY KEY
Measure user's recovery level.
DOWN-Decrease function value.
A. WHEN DISPLAY IS ACTIVATED THE FOLLOWING WILL DISPLAY
Temperature Range
Calendar Format
Clock Format
B. FUNCTIONS
SCAN: When Scan is indicated on the screen, the Main display will change every 6 seconds.
It will change to display as follows.
SCAN¶RPM /SPEED¶TIME¶DISTANCE¶CALORIES¶PULSE¶SCAN.
FUNCTION VALUE
Speed (Kilometers or Miles)
RPM
Time
Distance
Calories
Pulse - BPM (beats per minute)
C. INITIAL START UP
After installing the batteries, the computer will beep an extended sound and the LCD will fully light 2 seconds as a
test. The computer will then be ready for adjusting settings.
D. SETTING THE TIME & DATE:
Once the computer has initialized, it will automatically be ready to set the current time and date.
Please note: If no action is taken for 30 seconds, it will store the default time and date and be ready to function.
Setting the time and date are not required for proper computer operation.
After the computer initializes, the year will be flashing first. Change the year by rotating the dial clockwise or
counterclockwise until the year is correct. When the correct year is showing, press "Enter" in the center of the dial.
Next, the month will be flashing. Again, change the month by rotating the dial clockwise or counterclockwise until
the month is correct. When the correct month is showing, press "Enter" in the center of the dial. Follow this same
procedure to set the day, hour and minutes.
Please note: the clock function in 24 hour time. So, 8:00am is 8:00 and 8:00pm is 20:00.
(32~99 ) (0~60 )
1900/1/1~2006/1/1~2099/12/31
24 HOURS / 0:00~23:59
DISPLAY VALUE
0.0 to 99.9
Up to 999
Up to 99:59 Minutes
0 to 99 KPH/MPH
Up to 9999
30 to 240 bpm
- 11 -
RESET KEY
Press key to reset function value to 0
for reset.
UP-Increase function value.
ENTER KEY & Knob
Press key to select function and confirm
setting value.
AVAILABLE SETTING
None
None
Up to 99:00 Minutes
0.00 to 99.00 KPH/MPH
10 to 9990
30 to 240 bpm
INCREMENTS
None
None
1 minute
0.50
10 calories
1 bpm