Revision C 16/01/96
Set double-density image mode
EscL n
n
< image data > (27)(76)n1n2<image data>
1
2
<1Bh><4Ch>n1n2<image data>
This command enables you to define and print a single line raster bit image on a single text
line.
n
and n
1
The image consists of 256*n
column of 4/30".
Images are printed left to right.
Images are printed at an approximate horizontal resolution of 120 dots per inch and at an
approximate vertical resolution of 72 dots per inch.
Each byte represents a vertical column of eight dots, the most significant bit representing the
dot at the top. Simply set a bit to 1 if you want a dot to appear in that position, and to 0 if
you want white space to appear.
10 WIDTH "LPT1:", 255
20 LPRINT "***ESC L n1 n2 ***"CHR$(10);
30 FOR I=1 TO 5
40 '*DOUBLE-DENSITY BIT IMAGE MODE *
50 LPRINT CHR$(27);"L";CHR$(160);CHR$(0);
60 FOR J=1 TO 8
70 FOR K=1 TO 20
80 N=2^J-1
90 LPRINT CHR$(N);
100 NEXT K
110 NEXT J
120 LPRINT CHR$(10);
130 NEXT I:END
< Sample 16 >
Set double-speed, double-density image mode
EscY n
n
< image data > (27)(89)n1n2<image data>
1
2
<1Bh><59h>n1n2<image data>
This command enables you to define and print a single line raster bit image on a single text
line.
n
and n
1
The image consists of 256*n
column of 4/30".
Images are printed left to right.
Images are printed at an approximate horizontal resolution of 120 dots per inch and at an
approximate vertical resolution of 72 dots per inch.
Each byte represents a vertical column of eight dots, the most significant bit representing the
dot at the top. Simply set a bit to 1 if you want a dot to appear in that position, and to 0 if
you want white space to appear.
define the number of bytes that comprise the image.
2
+n
1
2
define the number of bytes that comprise the image.
2
+n
2
1
Chapter 6 " IBM Proprinter XL " - 20
bytes of data, each byte representing a single vertical
bytes of data, each byte representing a single vertical