Brother HL-Series Technical Reference Manual page 225

Revision C 16/01/96
Select / cancel underline mode
Esc– n
Ÿ
This command turns character underlining on or off.
Ÿ
If n is set to 1 subsequent text is printed underlined. All characters, including space
characters, are underlined with a continuous line.
Ÿ
Horizontal tabbed spaces are never underlined.
Ÿ
If n is set to 0 subsequent text is not underlined.
Ÿ
When you specify a value for n you may also use the character codes for '0' and '1' (48 and
49) instead of 0 and 1.
LPRINT CHR$(27); CHR$(45); CHR$(1); 'Underline following text
Select printing mode
Esc!n
Ÿ
This command allows you to select a combination of printing modes with just one command.
Ÿ
The various modes are weighted as shown. Add the numbers that correspond to each mode
you require and set n to the total.
Ÿ
Double-strike and emphasized modes are identical.
Ÿ
Proportional spacing overrides either character pitch setting (10 cpi or 12 cpi).
Ÿ
Proportional spacing and condensed mode cannot be combined. Proportional spacing has
precedence.
LPRINT CHR$(27); CHR$(33); CHR$(138); 'Proportionally space,
emphasize & underline following text.
(27)(45)n
(27)(33)n
10 characters per inch
12 characters per inch
Proportional spacing
Condensed mode
Emphasized mode
Double-strike mode
Double-width mode
Italic printing
Underline mode
Chapter 5 " EPSON FX-850 " - 26
<1B><2D>n
<1Bh><21h>n
0
1
2
4
8
16
32
64
128