Brother HL-Series Technical Reference Manual page 146

Revision C 16/01/96
2) PCL-Specific Variables
The following values are PCL (HP LaserJet 4 emulation) specific and can be set and requested using
PJL. These variables must be set using LPARM : PCL option.
Variables
PAPER
ORIENTATION
LEFTMARIN
RIGHTMARGIN
TOPMARGIN
BOTMARGIN
FORMLINES
FONTSOURCE
FONTNUMBER
PITCH
PTSIZE
SYMSET
AUTOLF
AUTOCR
AUTOWRAP
AUTOSKIP
Description
Set the paper size.
Set the orientation.
Set the left margin.
Set the right margin
Set the top margin
Set the bottom margin.
Set the number of lines.
Set the font source to Internal fonts
or
Set the font number
Pitch of the default font in units of
characters per inch. The pitch
value can be specified to two
decimal points
Height of the default font in units
of points. The point size is
significant to a quarter of a point
Set the symbol set.
Set the AUTO LF to ON or OFF
Set the AUTO CR to ON or OFF
Set the AUTO WRAP to ON or
OFF
Set the AUTO SKIP to ON or OFF
Chapter 3 "PJL" - 23
Sample Value Range
LETTER, A4, LEGAL,
EXECUTIVE, COM10,
MONARCH, C5, DL, JISB5,
A4LONG
PORTRAIT or LANDSCAPE
0 to 126 columns
0 to 136 columns
0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
5 to 128 lines
I or S
0 to n
0.44, 0.45, 99.99
4.00, 4.25, .......999.75
ROMAN8, ISOL1, ISOL2, ISOL5,
PC8, PC8DN, PC850, PC852,
PC8TK, WINL1, WINL2, WINL5,
DESKTOP, PSTEXT, VNINTL,
VNUS, MSPUBL, MATH8,
PSMATH, VNMATH, PIFONT,
LEGAL, ISO2, ISO4, ISO6,
ISO10, ISO11, ISO 14, ISO15,
ISO16, ISO17, ISO21, ISO 25,
ISO 57, ISO60, ISO61, ISO69,
ISO84, ISO85, WIN30, HPGERM,
HPSPAN, MCTEXT, OCRA,
OCRB, SYMBOL, WDINGS
ON or OFF
ON or OFF
ON or OFF
ON or OFF