Specify Vertical Plot Size; Specify Horizontal Plot Size - Brother HL-Series Technical Reference Manual

Revision C 16/01/96

Specify vertical plot size

Esc*c#L
• This command specifies the height in inches of an imported image.
• # is the height of the image in inches.
• # can be in the range 0 to 32767 and can have up to four places of decimals.
• This command is only applicable to existing graphic images which are being imported from an application.
• The imported graphic will be scaled so that its height matches that of the HP-GL/2 graphics window.

Specify horizontal plot size

Esc*c#K
• This command specifies the width in inches of the image being imported.
• # is the width of the image in inches.
• # can be in the range 0 to 32767 and can have up to four places of decimals.
• This command is only applicable to existing graphic images which are being imported from an application.
• The imported graphic will be scaled so that its width matches that of the HP-GL/2 graphics window.
(27)(42)(99)#(76)
(27)(42)(99)#(75)
Chapter 2 "PCL" - 88
<1Bh><2Ah><63h>#<4Ch>
<1Bh><2Ah><63h>#<4Bh>