Step 6 Install Motor; Step 7 Install Filters - Monogram ZV48T Installation Instructions Manual

STEP 6 INSTALL MOTOR

Outlet
Attachment
Slot
• From the inside of the hood, slip motor into the attach-
ment slot on the left.
• Rotate motor upwards until it snaps into the spring clip
on the right.
• Secure the motor to the hood with the machine screw
and lock washer. (Screw is marked with red or blue
paint.)
Top
IMPORTANT: Connector
ends are designed to mate
only one way. Match flat and
round connectors as shown.
• Plug connector into the motor.
Installation Instructions
Spring
Clip
Attachment
Screw
Spring
Clip

STEP 7 INSTALL FILTERS

• Place filter drip trays into the rear of the hood.
• Insert the grease filter into the opening and drop into
the trays.
• To remove the filters, grasp the handle, push the filter
up and lift out.
14
761Dia26
761Dia27