Monogram ZV48S Installation Instructions Manual
Professional vent hoods
Hide thumbs
Also See for ZV48S:
- Installation instructions manual (32 pages) ,
- Installation instructions manual (16 pages) ,
- Installation instructions manual (16 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Monogram ZV48S
Summary of Contents for Monogram ZV48S
- Page 1 INSTALLATION INSTRUCTIONS 30”, 36” and 48” Professional Vent Hoods MONOGRAM.COM...
- Page 2 Skill Level — Installation of this appliance requires CAUTION basic mechanical and electrical skills. Completion Time — 1 to 3 Hours. WARNING is not covered under the warranty. monogram.com or call 1.800.444.1845. monogram.ca qualified person(s) in accordance with all applicable or call 1.800.561.3344. monogram.com/use-and-care/parts or call 1.800.444.1845..
- Page 3 Durée d’assemblage — 1 à 3 heures. garantie ne s’applique pas. monogram.com ou appelez le 1.800.444.1845. combustion et une évacuation appropriées des gaz par le conduit d’évacuation (cheminée) de l’équipement à monogram.ca ou appelez le 1.800.561.3344.
- Page 4 1.800.444.1845. (chimenea) del equipamiento de consumo de combustible visite monogram.ca o llame al 1.800.561.3344. Siga las pautas y estándares de seguridad del fabricante parts o llame al 1.800.626.2002. PRECAUCIÓN Debido al peso y tamaño y las autoridades a cargo de los códigos locales.
- Page 5 Design Information CONTENTS Safety Information ............2 ............. 10 ............4 ..11 Installation Clearances ..........5 ......... 12 ......... 5 ......13 .......... 14 ..........6 ........... 14 ....................14 ........................14 ..............8 ............ 15 Tools and Materials Required ................
- Page 6 Advance Planning INSTALLATION CLEARANCES OPTIONAL DUCT COVER ACCESSORIES These vent hoods are designed to be installed onto a wall or beneath a soffit or cabinet. cooking surface. from the top of the hood to the ceiling. installation height of the hood and order the correct size duct cover.
- Page 7 Advance Planning DETERMINE INSTALLATION HEIGHT, DUCT COVER ACCESSORIES *Possible Hood Actual Ceiling Installation 6” Duct 12” Duct Height Height Covers Covers determined by the ceiling height. 2. Review the chart at right to determine the range of possible hood installation heights that can be accomplished with one or more duct covers.
- Page 8 Advance Planning ADVANCE PLANNING POWER SUPPLY Ductwork Planning IMPORTANT - (Please read carefully) WARNING ductwork on the 48” wide hoods. 30” and 36” hoods may be transitioned to 8” round. AVERTISSEMENT ADVERTENCIA elbows to vent horizontally through the rear wall. Remove house fuse or open circuit breaker before beginning installation.
- Page 9 Advance Planning DUCT FITTINGS Total Equivalent Quantity Equivalent Duct Piece Dimensions Length* Used Length Hoods Are Equipped For 10" Round Duct 5 ft. permissible lengths for duct runs to 1 ft. outdoors. (per foot length) NOTE: 1 ft. (per foot length) permissible equivalent lengths! Maximum recommended duct length for these hoods: 150 feet...
- Page 10 Installation Preparation TOOLS AND MATERIALS REQUIRED (NOT SUPPLIED) Hammer Electric or battery operated drill Duct tape Key Hole Saw stripper Safety glasses suit installation. Spirit level blade screwdrivers Strain relief for junction cover. Step ladder Saber saw Metal Snips or Sawzall grounded branch circuit.
- Page 11 Installation Preparation PARTS PROVIDED Locate the parts packed with the hood. Duct Transition with Original Screws with Damper Heat Lamp 2 Implement Rods and 4 Stand-offs HARDWARE PACKAGE Locate and check contents. Screws secure the transition to the hood outlet on the top shown actual size.
- Page 12 Installation Instructions DETERMINE HOOD, DUCTWORK AND WIRING LOCATIONS Draw the line to ceiling height. NOTE: one or more duct covers. indicating the bottom of the hood. measure 15-3/8” up and draw another line for the and Installation Height. location of the wood support. See illustration. FOR VERTICAL (Straight Up) DUCTING FOR DUCTING THROUGH REAR WALL hood to ceiling or soffit.
- Page 13 Installation Instructions INSTALL HOOD ONTO WALL Install Transition Onto Top of Hood SKIP THIS STEP IF INSTALLING BENEATH A IMPORTANT: Remove shipping tape from damper and SOFFIT OR CABINET, GO TO STEP 2B. check that damper moves freely. Duct with 4 screws provided. Transition connection.
- Page 14 Installation Instructions Alternate Mounting Method IMPORTANT: Soffit framing must be capable of INSTALL HOOD TO SOFFIT OR supporting up to 150 lbs. BENEATH CABINETS Install Transition Onto Top of Hood SKIP THIS STEP IF USING WALL MOUNTING IMPORTANT: Remove METHOD shipping tape from damper Duct and check that damper...
- Page 15 Installation Instructions CONNECT DUCTWORK INSTALL DUCT COVERS NOTE: airflow as illustrated. after film is peeled off. Remove protective film from duct covers. If more than with screws provided. with duct tape for an airtight seal. Air Flow Duct Tape Over Seam seal the flange Screw and Screw...
- Page 16 Installation Instructions INSTALL FILTERS INSTALL IMPLEMENT RODS Screw Stand-offs Into Hood Use Allen Wrench to Secure Rod to Stand-offs into the bottom of the hood. screw hole towards the inside of the hood. Secure the into the trays. filter up and lift out. FINALIZE INSTALLATION operation.
- Page 17 Notes 31-2000858 Rev. 0...
- Page 18 NOTE: safety glasses or goggles should be worn. ® monogram.com o call 1.800.444.1845. NOTE: and specifications are subject to change without notice. 31-2000858 Rev. 0 10-20 GEA Printed in Mexico...