Printhead Removal - Lexmark Infoprint 1332 User Manual

Infoprint 1332/1352/1372

Printhead removal

1.
Remove the laser assembly cover. See
2.
Disconnect the printhead cables (A) from the printhead assembly.
3.
Remove the printhead mounting screws (B) and remove the printhead.
Note: Do the
printhead assembly or loosen the mounting screws.
Note: The Infoprint 1332 machine type printhead is shown. Cables for the Infoprint 1352 and for the
Infoprint 1372 machine type are different. See
"Printhead 2 (Infoprint 1352)" on page
4-56
Service Manual
"Printhead assembly adjustment" on page 4-3
A B(425)
"Laser cover removal" on page
whenever you remove or replace the
A
"Printhead 1 (Infoprint 1332)" on page
7-11, and "Printhead 3 (1372)" on page
4-14.
7-10,
7-12.