Lexmark Infoprint 1332 User Manual page 123

Close Finished Side Door displayed—unable to clear or reset message. (POST
incomplete)
FRU
1 Side cover door
2 Side cover door switch
Stapler card assembly
POST incomplete—stapler cycles several times.
FRU
1 Stapler assembly
Action
Check the stapler access door for any signs of damage or broken
parts. Make sure the door correctly actuates the stapler side access
door switch.
Check the continuity of the stapler access door switch. If incorrect,
replace the stapler access door switch assembly. If correct, replace
the stapler card assembly.
Action
Replace the stapler assembly.
Note: When replacing the stapler assembly, observe the location of
the ground lead from the stapler assembly and the finisher frame.
Make sure the ground lead is correctly reattached.
Infoprint 1332/1352/1372
Diagnostic information
2-87