Replacing The Blades; Transport And Moving - Husqvarna AUTOMOWER Operator's Manual

8.6 Replacing the blades

WARNING
Always use original blades and
screws when replacing.
Only replacing the blades and
reusing the screw can result in the
screw wearing during mowing and
shearing off. The blades can then be
thrown out and cause serious injury.
There are three blades on Automower
screwed into the blade disc. The blades have two
edges to ensure a longer service life. The blade disc
rotates alternately to the left and alternately to the
right.
All three blades and screws must be replaced at the
same time to obtain a balanced mowing system.
There are several different types of mower blades to
choose from as accessories, with different features.
Use Husqvarna AB approved blades only.
To replace the blades:
1. Set the main switch to the OFF position.
2. Wear protective gloves.
3. Turn Automower
4. Rotate the skid plate so that its hole aligns with
the screw for the blade.
5. Unscrew the blade. Use a straight slot or
cross-tip screwdriver.
6. Pry apart the skid plate and blade disc a little and
remove the blade and screw.
7. Screw tight the new blade.

8.7 Transport and moving

Secure the machine during transport. It is important
that the Automower
®
being transported e.g. between different grass areas.
A specially designed Automower
an accessory to make it easy to transport the mower.
Contact your dealer for further information.
70 - English
8. MAINTENANCE
, which are
®
upside down.
®
does not move around while
bag is available as
®
OFF