Program; Select - Husqvarna AUTOMOWER Operator's Manual

5.2 Program

3. A
4. B
5. C
Under the program buttons you can save sets of
different settings to reuse them or to simplify the use
of an Automower® in several gardens. There are
some preset settings under respective buttons. You
can choose to use these or change them.
• To change settings: Make the required settings.
Save by holding down the selected button for 2
seconds, until two beeps are heard close
together. If, for example, button A is pressed the
Program A changed message will be shown for 2
seconds on the display.
• Use the saved information by quickly pressing the
required button.
If, for example, button A is pressed the Use
program A? question will appear on the display.
Program A is selected by pressing YES. The letter
A is then shown on the right-hand side of the
display to indicate which program is selected.

5.3 Select

6. Cancel:
• Press to go back one step in the menu structure,
or to interrupt an ongoing input.
7. YES:
• Press to confirm an entry or selection.
• Press to start the mower if more than
20 seconds has elapsed since you last pressed
a button and you want to close the solar cell
panel cover and/or set the STOP button in the
operating mode.
8. Arrow up and arrow down:
Press any of the arrow buttons to move the cursor
between menus or different selections.
5. CONTROL PANEL
3
4
5
6 7 8
English - 45