Husqvarna AUTOMOWER Operator's Manual page 59

When the selected number of days has elapsed,
Automower completes mowing and charges
®
the battery. The message Enter PIN code is
then shown on the display. You then enter your
code and press YES.
In addition, Automower
PIN-code each time the main switch is switched
to ON.
• Deactivate: Move the cursor to Time lock and
press YES. Now move the cursor to OFF and
press YES.
• Alarm (4-1-3)
This function means that the first number of the
PIN code must be specified within 10 seconds
after the STOP button has been pressed or the
mower has been lifted up for any reason. If the
correct number is not entered after three
attempts, the alarm sounds. The alarm can then
be stopped by entering the complete PIN code.
IMPORTANT INFORMATION
The alarm can be activated on the mower
using the Alarm function. It is recommended
that this function is used.
To:
• Activate: Move the cursor to Alarm and press
YES. Select ON to activate and press YES.
Then specify for how long the alarm should
sound, by answer the question Duration of
alarm?.
• Deactivate: Move the cursor to Alarm and press
YES. Select OFF to deactivate and press YES.
When you select OFF, the alarm function is also
deactivated.
• GPS (4-1-4)
GPS anti-theft protection offers increased
protection and control of Automower
mower is moved outside the preset protection
area, you will be alerted immediately via SMS.
New SMS are sent with updated location details
as the Automower
®
For more information on how you use this feature
and which preparations are required before you
can activate this function, see 3.9 Activate the
GPS anti-theft protection area on page 36 and
4.3 Using GPS-communication on page 38.
6. MENU FUNCTIONS
will now request the
®
® . If the
is moved.
PIN code
Time lock
Alarm
GPS
4-1-3
PIN code
Time lock
Alarm
GPS
4-1-4
_ _ _min
ON
OFF
ON
OFF
English - 59