Listening To The Radio - JVC UX-G70 Instructions Manual

Listening to the Radio

To set the AM tuner interval spacing
Before operating the tuner, it is required to select the
appropriate AM space interval used for your area.
• This is possible only while the System is on standby.
1
Select the AM band.
2
Turn off the power.
3
Select the appropriate AM space interval for your
area.
DOWN
(while holding...)
UP
(while holding...)
8
INFO
Main Unit
ONLY
TUNER FM
TUNER AM
AM 9KHZ
(9 kHz interval)
AM 10KHZ
(10 kHz interval)
To select the band (FM or AM)
Remote control:
To tune in to a station
While FM or AM is selected...
Remote control:
2
sec.
GROUP/TITLE SKIP
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
If the FM station has poor reception
PAGE
FM/PLAY MODE
The MONO indicator lights on the display. Reception will
improve though stereo effect is lost—Monaural reception.
To restore the stereo effect, press the button again (the
MONO indicator disappears).
To preset the stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected.
2
Activate the preset number entry mode.
ENTER/SET
GROUP
• Finish the following process while the indication on the
display is flashing.
Main unit:
Main unit:
2
sec.
DOWN UP
Remote
ONLY
Remote
ONLY
MP3 WMA MONO ST TA NEWS INFO A.STBY REC
1 DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP
RANDOM PRGM 3D PHONIC 1 2 3
PRGR. B.S.P. BONUS REC